Carpenter Square & Stair Calc2.9 - App Store
You'll be able to see results in few seconds.
Official App Store Link
We do not host Carpenter Square & Stair Calc on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Carpenter Square & Stair Calc is provided to you by soft112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of soft112.com contact us.
Publisher Description
Three essential construction tools in one pocket-sized app. Carpenter Square gives you corner squaring (Pythagorean theorem), a complete stair calculator with building code support, and a digital bubble level - all with direct tape measure input in feet, inches, and sixteenths. No decimal conversion. No signup. Just open and go.
-----------------------------------------
CORNER SQUARING CALCULATOR
-----------------------------------------
Square your corners in seconds - not minutes. Enter any 2 sides of a right triangle and we instantly calculate the 3rd.
. Input directly in feet, inches, and sixteenths - straight from your tape measure
. Calculates any missing side: Leg A, Leg B, or hypotenuse
. Visual triangle diagram with all three measurements labeled
. Save and recall your 7 most recent calculations
. Input validation catches impossible triangles before you waste material
Whether you're checking a foundation, squaring a deck frame, or verifying a wall layout - get your answer and get back to work.
-----------------------------------------
STAIR CALCULATOR
-----------------------------------------
Enter your floor-to-floor height and get a complete stair layout instantly. No more guessing riser counts or pulling out a separate calculator for stringer cuts.
. Number of risers and treads - calculated to code
. Exact riser height - evenly distributed across all steps
. Customizable tread depth (default 10", adjustable 9"-14")
. Total run - the full horizontal distance of your staircase
. Stringer length - the diagonal measurement for your cut
. Required floor opening - sized to your headroom clearance
. Stair angle in degrees
. Residential (8" max rise) and Commercial (7" max rise) building code support
. Headroom clearance calculation (default 6'8" minimum)
. Visual staircase diagram with labeled dimensions
. Save and recall previous staircase designs
Building code compliance note included with every calculation. Always verify with your local building official.
-----------------------------------------
DIGITAL BUBBLE LEVEL
-----------------------------------------
Turn your iPhone into a precision level. Uses your device's built-in motion sensors to give you real-time tilt measurements.
. Animated bubble indicator moves with your device
. Angle displayed in degrees with 0.1° precision
. +/- 25° measurement range
. No calibration needed - works immediately
-----------------------------------------
BUILT FOR THE JOB SITE
-----------------------------------------
Carpenter Square was designed and engineered by contractors with more than 30 years in the building industry. Every feature is built around one principle: tape measure in, answer out.
. Measurements in feet, inches, and sixteenths - the way you actually measure
. Fractions auto-simplify for easy reading (8/16 > 1/2, 14/16 > 7/8)
. Save up to 7 recent calculations per tool - tap to recall instantly
. Visual diagrams for every calculation so you can verify at a glance
. Under 2.5 MB - downloads in seconds, even on spotty job-site signal
. No account required. No data collected. No ads. Just the tools you need.
Perfect for carpenters, framers, general contractors, remodelers, deck builders, stair builders, and anyone who needs fast, accurate construction math without fumbling with a calculator.
Download Carpenter Square and get back to building.
Version History NEW: Full stair calculator with building code compliance! Enter floor-to-floor height → get risers, treads, stringer length & more. Tap measure in, answer out. 2.9 Feb 10 This update fixes a couple bugs, and adds the ability for quick tabbing between measurement fields. 2.8 09/06/2024 This updated fixes the issue where your keyboard would cover the text entry in the main page of the app 2.7 01/03/2023 Updated App Name and Pricing 2.6 01/17/2018 This update includes support for Apple's ARKit. Use our ARKit Squaring tool to measure two sides of your triangle and we'll auto-populate the third, right on your screen as if it were right in front of you!
We also included a new Bubble Level tool to help you ensure that your surfaces are square and even before calculating all your edges. 2.5 12/04/2017 2.2 11/06/2017
